Peppy screensaver

Install Peppy screensaver in Volumio:

install a VOLUMIO image to SD card
enable SSH: http://volumio.local/dev
username: volumio password: volumio
for some configurations it’s better to enable root account, use putty with the volumio account for this and edit sshd_config:
sudo nano /etc/ssh/sshd_config
set: PermitRootLogin yes and reboot
set DAC Model: HiFiBerry Amp2
for a connected HDMI-display you need the touchscreen-plugin installed
if installation succsesfully, set ‘No Screenssaver While Playing’ to ‘ON’
for the Waveshare 7.9inch HDMI LCD the follow entries in /root/userconfig.txt important

#### GPIO set for LED switch ####
# op - Output, dh - Driving high (for outputs)
gpio=23=op,dh

#### Touch Display rotation setting below: do not alter ####
hdmi_group=2
hdmi_mode=87
hdmi_timings=400 0 100 10 140 1280 10 20 20 2 0 0 0 60 0 43000000 3

hdmi_blanking=1
display_rotate=3

#### Touch Display rotation setting below: do not alter ####
display_lcd_rotate=3
display_hdmi_rotate=3
To install the peppy_screensaver plugin download leatest version from Github
wget https://github.com/2aCD-creator/volumio-plugins/raw/gh-pages/plugins/volumio/armhf/user_interface/peppy_screensaver/peppy_screensaver_2.2.1.zip
cd /home/volumio
mkdir peppy_screensaver
miniunzip peppy_screensaver_2.2.1.zip -d peppy_screensaver
cd peppy_screensaver
volumio plugin install
Restart after the plugin peppy screensaver is installed

Setup PeppyMeter